Calling 811 before digging is required, but many contractors are surprised by what is left unmarked. Utility owners locate their own facilities, which generally stop at the meter or property service point. Everything on the private side, the lines the property owns, remains the contractor's or owner's responsibility to find.
Lines 811 commonly does not mark
- Private sewer laterals and building services
- Site lighting and parking lot electrical
- Irrigation mains and controllers
- Private storm lines and site drainage
- Gas and water lines past the meter
- Fiber and low-voltage runs between buildings
How private locating works
Electromagnetic locators trace conductive lines and lines with tracer wire. For non-metallic sewer and storm lines, a sonde attached to a camera or push rod is sent through the pipe and traced from the surface. Results are marked with paint and flags in the standard color code and can be recorded on a sketch for the project file.
Verify before you commit
Locating gives horizontal position and an estimated depth. When you will be working close to a marked line, hydro-excavation potholing exposes it so the crew sees the exact depth and material before boring or trenching.
Private locating FAQ
- Do I still need to call 811 if I hire a private locator?
- Yes. Private locating supplements the 811 ticket; it does not replace it.
- Can you find a plastic sewer line?
- Yes, by sending a sonde through the line with a camera or rod and tracing it from the surface.
